Automatic Pole Barrier Gate Car Parking Lot Swing Gate AC220V/110V
Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xRunning Speed | Starting Rod 2-6S Adjustable | Boom Direction | Exchangeable |
---|---|---|---|
Box Thickness | Foot Thickness 1.5mm | Dimension | 350X282X1000mm |
Pole Length | ≤ 6 Meters Straight Rod | Working Temperature | -40 Degrees To +75 Degrees |
Rated Voltage | AC 220V (10%) 50Hz/60Hz, 110V (10%) 50Hz/60Hz | Remote Control Distance | >=30m |
Highlight | Automatic Pole Barrier Gate,AC220V Pole Barrier Gate,AC110V parking lot swing gate |
AC220V/110V Automatic Car Parking Boom Barrier Gate For Parking Lot
Auto-closing
Support the infrared photocell for anti-bumping function (optional)
Support external and internal vehicle loop detector (optional)
Traffic light interface (AC220V, can support lamp with 40W)
Wire control (switch signal)/Remote control (418MHZ)
Rs485 Communication module (optional)
Open,close control interface for parking system
Provide limit state signal to parking system
Product performance
1. Special rotating structure,no gear, no belt rotation,no maintenance,stable use,long life
2. The specially designed balance structure enables the brake lever to start slowly,run quickly,and stop slowly.
3. The jitter caused by the operation of the brake lever is eliminated.
4. The brake lever runs permanently at 90 degrees, and the 360-degree operation accident occurs after troubleshooting.
5. Specially designed low-speed aluminum housing motor, gearbox one-piece design, low noise, fast heat dissipation.
6. The drive mechanism is designed with an intelligent overheating protection system to control the temperature rise of the motor under frequent use.Make the motor not easy to burn out.
Take-off and landing time | 1.5S 3S 6S |
Working temperature | -25℃~+75℃ |
Working humidity | ≤90%, no condensation |
Power supply | AC 220V/50HZ |
Fuse specification | φ5×20 5A |
Power output | DC 12V ≤0.2A |
Fall limit output | dry contact signal, normally open |
Ceiling output | dry contact signal, normally open |
Receiver working voltage | DC 5V |
Encoder working voltage | DC 5V |
Operating voltage of limit switch | DC 5V |